The Waeco CU55 & VD07 cooling kit from Dometic allows you to convert a locker or coolbox into a fridge by installing this DIY cooling kit.
The kit consists of a compressor and an “O” shaped cooling plate, suitable for a coolbox volume of 100 litres max and a thermostat switch.
The Danfoss compressor features integrated low voltage protection, low voltage cut-out, and a stainless steel mounting plate. It has self-sealing valve couplings and is air cooled.
CU-55 Compressor is an Entry-level unit for small refrigeration capacities and for use in cool waters. Features Include:
Cooling capacities: 130 litres max. for normal refrigeration with direct evaporators, 100 litres max. with cold accumulators
Voltage: 12/24 volts DC
Power input: approx. 35 or 40 watts, depending on the evaporator type
System: Fully hermetic compressor with control electronics and integrated low-voltage protection, low-voltage cut-off, electronic reverse pole protection, dynamically ventilated wire tube condenser, self-sealing valve couplings
Dimensions (WxHxD): 220 x 160 x 220 mm
Weight: approx. 6.5 kg
Quality features: Suitable for floor mounting, corrosion-resistant stainless steel mounting plate
Item designation: ColdMachine 55
VD-07 Evaporator plate:
O-evaporator for installation in chest and upright refrigerators
Cooling capacities: 120 litres max. with an insulation of 35 mm PU, 130 litres max. with an insulation of 50 mm PU
Power input: approx. 35 watts
Current consumption: 1.46 Ah/h with 35 mm PU insulation,
1.17 Ah/h with 50 mm PU insulation, both at +5°C interior temperature, +32°C ambient temperature and medium cooling capacities
System: Standard O-evaporator for horizontal or vertical installation, self-sealing valve couplings, flexible connection pipe approx. 2 m, continuously variable thermostat (for external installation, with blue turning knob and LED indicator, white plastic housing), electric supply cord approx. 3 m
Dimensions (WxHxD): 255 x 210 x 100 mm
Weight: approx. 1.5 kg
