Hempel Infinity – Silic One Recharger Treatment – 2.4L
£222.48 £189.95
This item is currently unavailable to purchase.
Want to be notified when this product is back in stock?
Hempel’s Infinity is a water-based coating formulated to extend the high performance of Hempel’s silicone coatings for a further season without the need for repainting.
To recharge the efficiency of previously applied Hempel’s Silic One or Hempasil Pro fouling release products.
ONLY apply Hempel’s Infinity over Hempel’s Silic One or Hempasil Pro in good condition.
Quick and easy seasonal maintenance – no sanding, no maskingand no painting
Cleanliness
– Remove oil, grease and other contaminants by suitable detergent cleaning.
New build:
– Not for uncoated surfaces.
– Only apply Hempel’s Infinity over Hempel’s Silic One or Hempasil Pro in good condition.
Maintenance and Repair
– Existing silicone coating: Any repairs to the previous coating must be carried out minimum 24 hours (max. 1 month) prior to application of Hempel’s Infinity.
Thinner
Fresh water
Cleaner
Fresh water
Application method
Brush/Roller – No application parameters
Film thickness
Wet film thickness – 112 micron [4.5 mils]Theoretical spreading rate – 8.9 m²/L [363 sq ft/US gal]
Application conditions
– To avoid condensation, apply on a clean and dry surface with atemperature that is at least 3°C [5°F] above the dew point.
Relative Humidity:
– Relative humidity must be below 85% during application.
– Relative humidity must be below XX% during drying and curing.
Application remarks
– Stir well before use.
– Apply the product liberally ensuring entire underwater area and previous coating is covered.
– Allow the product to infuse with the previous coating for a minimum of 24 hours (48 hours below 10°C).
– Hose off with fresh water.
– Dispose of residue as normal paint.
Product compatibility
– Previous coat: Recommended products are: Hempel’s Silic One77450 and Hempasil Pro 87850
– Subsequent coat: None.
Drying time
|
Surface Temperature |
|
10ºC (50ºF) |
20ºC (68ºF) |
30ºC (86ºF) |
|
Surface Dry |
Hours |
8 |
4 |
2 |
Determined for dry film thickness 20 micron [0.8 mils] at standard conditions, see Hempel’s Explanatory Notes for details. Time to immersion: Minimum: 24Hours 20°C ; Maximum 1 month
Drying conditions
– To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing.
Shelf Life
|
Ambient temperature
|
25ºC (77ºF) |
|
Product |
24 months |
Shelf life from date of production, when stored in original, unopened containers. Thereafter, the product quality must be re-inspected. Storage at elevated temperatures may reduce shelf life. For advice, please consult Hempel.
Storage conditions
– Temperature must not go below 5°C [41°F] during transport and storage.
– The product must be stored in accordance with Safety Data Sheet, label and local regulations. Keep the containers in a dry, shaded, cool, well-ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.