Customer Notice -  Our Port Solent store will be temporarily closed for customers. However our website and mail order business will remain fully operational. Click and collect is now available again from our Port Solent store.

Rule Lopro Auto 900Gph Bilge Pump

Click on an image to display a larger detailed image.

Rule Lopro Auto 900Gph Bilge Pump


RRP £62.00


Size: 900
Colour: 12v



  • The Rule LoPro LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity.
  • Designed for tight spaces, the height of the pump is only 2-1/4".
  • It features a threaded discharge nozzle to which you can attach either the included straight or 90 fitting.
  • Multiple ports are available for this pump.
  • All ports are included.
  • 3/4" Straight.
  • 3/4" Right angle.
  • 1" and 1-1/8".
  • It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water.
  • The entire discharge body swivels up to 180 for ease of installation.
  • The hose can also swivel 360 for better routing.
  • The LoPro LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2" or 1.3".
  • High or Low Water Sensing Mode:
  • The pump starts when water reaches a 2" level.
  • By turning the motor cartridge upside down, the sensor is set at 1.3".
  • Electronic Automatic Mode:
  • The pump automatically turns on every 2.5 minutes to check for water, and if it's detected the pump stays on until the water is gone.

  • Voltage: 12 Volt DC
  • Flow: 900 GPH open flow at 13.6 Volts
  • Amp Draw: 4 Amp approx
  • Protection: TCO
  • Port Configuration: 3/4", 1", 1-1/8" Straight, 90 degree 3/4"
  • Backflow preventer valve can be used with straight fittings
  • Dimension:
  • Height: 2.3"
  • Length: 9.3"
  • Width: 2.3"
Size / ColourPart NumberStock AvailabilityPrice
900 / 12v99483739 34 at 31/05 13:06 £54.95 Add to Basket