With this tough and ultracompact 4 channel full-range amplifier featuring Bluetooth® technology, you can enjoy every note from every part of your boat.
STREAM ON THE GO
This amplifier pairs with your compatible smartphone for seamless audio streaming and includes a wired remote that can be flush, surface or bar-mounted. Its compact size makes it a perfect addition to your small boat, jet ski or overland vehicle.
CLASS-D AMPLIFIER TECHNOLOGY
The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for an enhanced level of audio performance.
RUGGED DESIGN
The included remote is IPX7-rated and the amplifier is built to IP67 standards (excluding cables) to withstand abuse in harsh marine environments.
Specifications
| Amplifier class | Class D |
| Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) | 40 W x 4 / 100 W x 2 (Bridged) |
| Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) | 50 W x 4 |
| Signal-to-Noise Ratio, referred to 1 W (A-weighted, 20 Hz – 20 kHz noise bandwidth): Analog Inputs | > 70 dB |
| THD+N @ Rated Power | <1% @ 4 Ω per Channel |
| Frequency response (+0, -1dB) | 20 Hz – 20 kHz |
| Input sensitivity @ RCA inputs | 200mV-8VRMS |
| Input voltage range @ RCA inputs | Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High) |
| Input impedance | 11 kΩ (High), 20 kΩ (Low) |
| Current consumption (StandBy) | <1mA |
| Current consumption (Idle) | 700-750mA |
| Fuse rating | 35A |
| Recommended fuse type(s) | AFS, AGU or MaxiFuse™ |
| Min. copper power/Ground wire gauge | 4 AWG wire |



