The high performance waterproofer designed to enhance performance and revitalise the breathability of waterproof clothing.
- Easy to use in your washing machine or by hand, non flammable and PFAS free.
- Adds water repellency, revives breathability and reduces water absorbency without tumble drying
- Enhances the performance of your gear, keeping you warmer and drier
- Recommended for Gore-Tex®, Sympatex®, eVent®, Nikwax Analogy® and all other waterproof fabrics.
How to use: This will depend whether you purchase Wash In or Spray.
Use Nikwax TX.Direct® Wash-In in a washing machine…
IMPORTANT: Shake bottle before use. Do not use conventional detergents. Always clean first with Nikwax® Tech Wash® in a separate wash cycle. Do not dry before waterproofing.
Remove all detergent build-up from the detergent dispenser.
Place a maximum of 2 clean garments in washing machine.
Add 100ml of TX.Direct® per garment.
Run a 30°C synthetic cycle on a slow spin.
Drying: Air dry or tumble dry on a low setting if care label allows.
To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.
Nikwax TX.Direct® Wash-In can also be applied by hand…
IMPORTANT: Use gloves
Immerse 1 clean garment in 7.5L of hand hot water, in a bowl or sink.
Add 100ml of TX.Direct®.
Agitate to mix, leave to soak for 5 minutes, then agitate thoroughly.
Rinse with cold water until water runs clear.
Drying: Air dry or tumble dry on a low setting if care label allows.
Apply Nikwax TX.Direct® Spray-On by hand…
IMPORTANT: Shake well before use. Always clean first with Nikwax® Tech Wash®.
Protect work surface from potential overspray.
Spray evenly onto clean, wet item from a distance of 15cm.
Wait for 5 minutes. Remove any surplus product with a damp cloth.
Nikwax TX.Direct® treated clothing needs no heat to develop Durable Water Repellency (DWR)…
Air dry or tumble dry on a low setting if care label allows.
To maintain waterproofing always clean with Nikwax® Tech Wash®. Do not use conventional detergents.


